T91 Tactical provides best MIL-SPEC parts, and accessories that will make your T91, T65K2, and Wolf A1 more modernized and reliable. Visit our website: www.T91Tactical.com
Two bottom set screws are designed to secure and adjust the position of hammer and trigger pins installation. This trigger is comes with a set of anti-walk lock pins.
1. Place the drop in trigger into the trigger well and insert the anti-walk pins without tightening them.
2. Tighten the two set screws on both sides of the drop in trigger, just until resistance is met.
3. Completely tighten both anti-walk pin screws.
4. Function test your new trigger. Adjust the pull weight through the center set screw and use a trigger pull gauge to ensure the pull weight is no lower than 3.5 lb set limit. After set, put a drop of blue loctite on the set screw to secure it.
Caution: Always perform function check before firing live round. If any issues arise after the installation, please contact us directly.
NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.
P.O. Box 1682, Queen Creek, AZ. 85142